Liquid silicone machine maintenance steps - injection molding machine manufacturer

Liquid silicone machine maintenance steps - injection molding machine manufacturer: Minghui is one of the most professional and experienced manufacturers of vertical plastic injection machines in China. Minghui injection molding machine will introduce you to the daily maintenance steps of liquid silicone machine.

Liquid silicone machines need frequent maintenance to prevent sudden mechanical failures and avoid chain mechanical failures. Minghui is one of the most professional and experienced manufacturers of vertical plastic injection machines in China. Minghui injection molding machine will introduce you to the daily maintenance steps of liquid silicone machine.

1. To replace the glue type, the pipeline needs to be cleaned. First, close the feed valve and open the discharge valve. 

After removing the remaining rubber in the rubber bucket, close the discharge valve and open the feed valve, and pour the cleaning solvent into the glue storage. In the barrel, activate the body, and flush the solvent out according to the usual operation method.

2. If the air pressure is abnormal or water vapor is found, it is necessary to remove the water vapor in the pressure regulating filter or check whether the air pressure is abnormal. 

Before using a large amount of glue, please try a small amount of the silicone glue dispenser to master the use of the product to avoid errors. When there is no problem in the test, use the double-liquid glue machine or the double-liquid glue machine for mass production.

The vacuum system performs vacuum bubble treatment on the glue to eliminate the bubbles generated during the mixing process, or let it stand for 10-20 minutes before using it to prevent the bubbles generated during mixing can be removed in time.

3. The machine part should be wiped clean regularly to increase the service life. The more the amount of glue mixed together, the faster its reaction and the faster the curing speed, so it should be carried out according to the actual production situation. Reasonable glue allocation.

otherwise it will cause a waste of glue. Eliminate unexpected situations and improve production efficiency. Today's liquid control technology and dispensing equipment are widely used in various production fields of modern industry.

4. The machine needs to be unplugged when it is out of service for a long time. This will not only extend the life of the machine, but also save a lot of electricity bills. 

With the ever-changing industrial development needs, liquid control technology and dispensing equipment are also In the continuous development, the products of the bulk bag wholesale are susceptible to the influence of ultraviolet rays when used, and the problem of aging occurs. 

Therefore, in the production of the product, it is necessary to conduct an anti-ultraviolet test to ensure that its effect is excellent. The current detection amount of liquid silicone machine It is also gradually rising.