How to maintain LSR Liquid Silicone Rubber Machine?

 The LSR Liquid Silicone Rubber Machine should pay attention to maintenance and maintenance to avoid the specific measures taken to avoid chain mechanical failures. Many users do not know how to maintain the liquid silicone machine. Today, the Minghui injection molding machine manufacturer will introduce to you how to maintain the LSR Liquid Silicone Rubber Machine. Good to increase the service life of the machine.

▲1. Maintenance of lubrication system

Before each operation, it should be clearly stipulated that the daily lubrication points should be refilled with grease for good lubrication. If the machinery and equipment have a centralized lubrication system, the oil volume should be checked regularly every day, and the oil volume should be refilled before the lower limit is specified. Lubricating grease. Lubricating oil should be added to the required position before the machine is started up for the first time. After that, it can be added every three months.

▲2. Regularly check the amount of fuel in the fuel tank

It is necessary to check the amount of oil in the mailbox regularly every day. If the amount of oil is below the center line of the dipstick gauge, the amount of oil should be added in time to make it reach the highest center line. In this process, you need to pay attention to clean work. Avoid water, wood chips, iron chips, cotton yarn and other objects from contaminating the oil, causing oil deterioration or clogging of various valves.

▲3. Regular inspection of heating safety devices

When changing shifts, check the heating safety device to check whether everything is normal for heating, whether the heating ring is in poor contact, and whether the thermocouple is in good contact.

▲4. Regular inspection of safety facilities

Regularly check the switches of various electrical appliances, especially whether everything is normal for the safety door and limit switch. Before taking over, check the emergency stop switch and safety door. When the liquid silicone machine is started, press the emergency stop switch to request a hydraulic pump or motor The energy science department stops running, and other functional parts stop moving.